Condensation water droplet prevention function

The surface fiber coat layer has the effect of suppressing condensation from occurring.
It also prevents condensate from dripping from the roof in the event condensation occurs due to dramatic environmental changes as it possess a water retention capability of approx. 400 g/m².

Top

Design

The surface has a velvet tone finish overflowing with high class richness. It is perfect for designing train station platforms and other open-air roof spaces. It is also perfect for finishing materials as wall materials for offices, stores, entrances and other areas.

Supports continuous roofs

Continuous roof folded sheets, roof decks, etc. can be created, while "continuous molded products" with insulation & condensation water retention performance can be manufactured.

Original sheet adhesion

Compared to other backing materials

Type	Glass fiber sheet	Inorganic foam plastic Polyfoam	FIBER COAT
Reliability for cladding materials (peeling)	Poor	Good	Excellent
Condensation prevention function	Good	Good	Good
Waste disposal	Industrial waste handling	Industrial waste handling	Recyclable products
Construction track record	Factories, warehouses, offices, etc.	Factories, warehouses, offices, etc.	Train station platforms, factories

Weather resistance

When steel sheets with 2 conventional backing material types affixed were compared to a fiber coated steel sheet in exposure tests, conventional backing material was shown to be peeling from the edges after 1 month had passed, but the fiber coated steel sheet was shown to have no peeling even after 2 years had passed.

Certified fireproof product (Certification number NM-1213 Coated steel sheet)

Acquired Fireproofing Material certification from the Ministry of Land, Infrastructure, Transport and Tourism.
Some models also acquired the 30-minute roof fireproofing certification from partner metal roofing manufacturers.

Roll mold, bending processibility

Supports roof folded sheets (circular seams, mated method) and other roll mold processing. (Reference models)

Insulation performance

The fiber coated steel sheet has a thermal transmittance (K) of 6.17 W/(m²K) in a set condition at wind speed of 9 m/s, thus has virtually the same level as slate surges.

Reference:	Metal roofs (no insulation materials)	— 7.75 W/(m²K)
	6.3 mm slate surge	— 6.81 W/(m²K)

Roof structure

Edge water repellant process

Fiber coat steel sheets have very high water absorption, and expand through capillarity when water hits a certain area.
We recommend eliminating water retention by coating the fiber coat with a water repellant coating to appropriate locations where water hits and preventing rising water in order to prevent water infiltration from the nose or gutter.

 Standard specifications and typical characteristics (The performance of original sheet used are as per coated steel sheet manufacturer specifications.)

1/2

Uses	Standard Name	Original sheet specifications
		Name	Type	Non fiber coated surface specifications		Surface thickness mm	Mass Per Unit Area
				Process Details	Coating Color
G e n e r a l P u r p o s e	(Galvalume steel sheet)
	FC 0833	55% hot dip aluminum & galvanized steel plate	SGLCCR	Substrate	Standards	0.5	AZ-150
	FC 0833	55% hot dip aluminum & galvanized steel plate	SGLCCR	Substrate	Standards	0.6	AZ-150
	FC 0833	55% hot dip aluminum & galvanized steel plate	SGLCCR	Substrate	Standards	0.8	AZ-150
	FC 0833	55% hot dip aluminum & galvanized steel plate	SGLCCR	Substrate	Standards	1.0	AZ-150
	(Color galvalume steel sheet)
	FC 0833	55% coated hot dip aluminum & galvanized steel plate	CGLCCR-20	Resin coated	Standards	0.5	AZ-150
	FC 0833	55% coated hot dip aluminum & galvanized steel plate	CGLCCR-20	Resin coated	Standards	0.6	AZ-150
	FC 0833	55% coated hot dip aluminum & galvanized steel plate	CGLCCR-20	Resin coated	Standards	0.8	AZ-150
	FC 0833	55% coated hot dip aluminum & galvanized steel plate	CGLCCR-20	Resin coated	Standards	1.0	AZ-150
	(Fluorine galvalume steel sheet)
	FC 0833	55% coated hot dip aluminum & galvanized steel plate	CGLCCR-30	Fluorine coated	Standards	0.5	AZ-150
	FC 0833	55% coated hot dip aluminum & galvanized steel plate	CGLCCR-30	Fluorine coated	Standards	0.6	AZ-150
	FC 0833	55% coated hot dip aluminum & galvanized steel plate	CGLCCR-30	Fluorine coated	Standards	0.8	AZ-150
	FC 0833	55% coated hot dip aluminum & galvanized steel plate	CGLCCR-30	Fluorine coated	Standards	1.0	AZ-150

2/2

Uses	Standard Name	Fiber coat specifications			Typical characteristics value
		Pile Materials	Line Diameter dtex	Color	Fiber coat coverage		Water retention volume g/m²	Unit weight kg/m²
					g/m²	No./cm²
G e n e r a l P u r p o s e	(Galvalume steel sheet)
	FC 0833	Nylon 66	3.3	4-color	72	27,000	388	4.26
	FC 0833	Nylon 66	3.3	4-color	72	27,000	388	5.05
	FC 0833	Nylon 66	3.3	4-color	72	27,000	388	6.62
	FC 0833	Nylon 66	3.3	4-color	72	27,000	388	8.19
	(Color galvalume steel sheet)
	FC 0833	Nylon 66	3.3	4-color	72	27,000	388	4.26
	FC 0833	Nylon 66	3.3	4-color	72	27,000	388	5.05
	FC 0833	Nylon 66	3.3	4-color	72	27,000	388	6.62
	FC 0833	Nylon 66	3.3	4-color	72	27,000	388	8.19
	(Fluorine galvalume steel sheet)
	FC 0833	Nylon 66	3.3	4-color	72	27,000	388	4.26
	FC 0833	Nylon 66	3.3	4-color	72	27,000	388	5.05
	FC 0833	Nylon 66	3.3	4-color	72	27,000	388	6.62
	FC 0833	Nylon 66	3.3	4-color	72	27,000	388	8.19

Top